You are here: Rear Shocks > Stuck Down Shock

"Stuck Down" Shock Procedure

Under certain circumstances, a FLOAT or DHX AIR shock can become what is generally recognized as "stuck down”. If your FLOAT or DHX AIR shock has not returned to its original neutral length (eye-to-eye position), DO NOT attempt to disassemble the outer air sleeve or any other part of the shock. Air has become trapped in the air negative chamber, and can potentially cause serious injury if you attempt to disassemble a shock in this condition.

If your shock is stuck down, immediately return it to FOX Racing Shox or an Authorized Service Center for service.

Procedure to check for a "stuck down" shock:
  1. Release air pressure from the shock by removing the air cap and depressing the Schrader valve. You can use the top of the air cap to press in the Schrader valve.
  2. Using a FOX Racing Shox High Pressure Pump, pressurize the shock to 250 psi.
  3. If the shock does not extend, it is stuck down.
  4. Contact FOX Racing Shox or an Authorized Service Center to obtain repair/service information.

    WARNING:  Do not attempt to pull apart, open, disassemble, or service a shock that is stuck down; SERIOUS INJURY or DEATH can be the result. Contact FOX Racing Shox or an Authorized Service Center for assistance.

    The Air Sleeve Maintenance procedure contains detailed information on clearing a stuck down shock.

    CAUTION:  When working on an air shock, always assume that it is stuck down before taking it apart for service.


WHEREVER YOU RIDE. WHEREVER YOU RIDE.


Bushing Technology & Inspection | Seals & Foam Rings | Control Direction | Oil Volumes | Structural Inspection | Dropout Thickness Inspection | Torque Values | Unit Conversion | Suspension Tuning Tips | Using the Pump | Important Safety Information | Service Intervals | Contact FOX Service | Warranty Information | FOXHelp Service Web Site


Copyright © 2010
FOX Factory Inc.