Converts aluminum shocks to coil-over. Aluminum kit includes spring retainer, preload ring, and a retainer ring to run 2.5" springs on one aluminum shock.
(803-02-047) Coil-over Kit - Aluminum Shock
Converts steel shocks to coil-over. Steel kit includes threaded body sleeve, spring retainer, preload ring, and a retainer ring to run 2.5" springs on one steel shock.
(803-02-062-Kit) Coil-over Kit - Steel Shock
Nylon spring divider allows you to run two 2.5" springs on Aluminum shocks.
(234-00-386) 2.5" Short Spring Divider
(234-00-010-B) 2.5" Spring Divider
Used with a spring divider on aluminum shocks, a cross-over ring determines when the shock crosses over from dual to single spring-rate. For Aluminum shocks.
(234-00-356-2) 2.0" Cross-over ring
Exclusively Formulated To Out Perform The Competition. Engineered to perform at high temperatures—formulated using advanced base fluids to provide consistent and predictable suspension performance at temperatures ranging from -70° to a scorching 400°.
(025-03-011) JM92 Fluid – Quart
(025-03-012) JM92 Fluid – Gallon
(025-03-013) JM92 Fluid – 5 Gallon
(025-03-014) JM92 Fluid – 55 Gallon
Billet aluminum rod guide or bearing housing seal installation tools cover sharp shaft end threads negating any possibility of seal damage.
(398-00-026-B) for 1/2" Rod
(398-00-094-A) for 5/8" Rod
The same gauge FOX technicians use to properly read reservoir nitrogen levels without sustaining pressure loss from 0 to 600 psi.
(802-02-002-A) 0-600psi Schrader Style Nitrogen Filler Gauge
Black anodized aluminum tool designed for quick and easy removal of the bearing cap without damaging the cap or shock body.
(803-00-668) Bearing Cap Spanner Wrench
Black anodized aluminum spanner wrench with stainless steel pin facilitates removal of the base valve from the shock body.
(803-00-766) 2.25" Base Valve Spanner Wrench
Hardened steel 3/8"drive tri-flat socket for simple removal of the DSC adjuster assembly.
(398-00-396) DSC Removal Socket
Complete kit of proprietary deburred valve shims for 2.0" shocks. Includes 10 shims in every available size.
(803-01-024) 2.0" Valve Shim Kit
Replacements for steel shocks with seal screws as required by some sanctioning bodies.
(802-00-029-KIT) Seal Screw & Plug
(803-00-934) Seal Screw 10 Pack
Billet aluminum tool used to fill shocks equipped with a seal screw as required by the rules of some race sanctioning bodies.
(803-00-894) Seal Screw Filler Tool
Billet aluminum shaft clamp assists in the removal of eyelets from 1/2" and 5/8" shafts.
(803-00-895) Shaft Clamp for 1/2" & 5/8" Shafts
Call us at 619.768.1800 to discuss upgrade options or send us an email »
Once you get a Return Authorization number, send your shocks to:
FOX Service Center
1280 N Johnson Ave Suite 100
El Cajon, CA 92020
Looking for suspension service?
Get tuned by the same FOX technicians the pros depend on.