TREK PUSH-TO-UNLOCK REMOTE CONVERSION- FORK AND REAKTIV XC SHOCK
The video below guides you through the process of converting the Push-to-Lock Remote fork damper and Remote Reaktiv XC rear shock to use the new for MY18 Push-to-Unlock logic and the new MY18 2-position remote lever.
This video specifically shows how to install the 803-01-222 and 803-01-223 kits which contain complete MY18 remote FIT4 SC dampers (P-S or F-S), MY18 2-position remote levers, and the FLOAT DPS/Reaktiv rear shock compression cam and torsion spring.
WARNING: FOX products should be serviced by a trained bicycle service technician, in accordance with FOX specifications. If you have any doubt whether or not you can properly service your FOX product, then DO NOT attempt it. Improperly serviced products can fail, causing the rider to lose control resulting in SERIOUS INJURY OR DEATH.
WARNING: FOX suspension products contain pressurized nitrogen, air, oil, or all 3. Suspension misuse can cause property damage, SERIOUS INJURY OR DEATH. DO NOT puncture, incinerate or crush any portion of a FOX suspension product. DO NOT attempt to disassemble any portion of a FOX suspension product, unless expressly instructed to do so by the applicable FOX technical documentation, and then ONLY while strictly adhering to all FOX instructions and warnings in that instance.
WARNING: Modification, improper service, or use of aftermarket replacement parts with FOX forks and shocks may cause the product to malfunction, resulting in SERIOUS INJURY OR DEATH. DO NOT modify any part of a fork or shock, including the fork brace (lower leg cross brace), crown, steerer, upper and lower leg tubes, or internal parts, except as instructed herein. Any unauthorized modification may void the warranty, and may cause failure or the fork or shock, resulting in SERIOUS INJURY OR DEATH.