Use the diagram below if you need help deciphering control orientation.
As all fork and rear shock control knobs are manipulated relative to the seated riders' perspective, fork control directions are relatively straightforward. However, with rear shocks it can be confusing, as there are a myriad of suspension designs that require FOX Racing Shox rear shocks to be installed in various orientations.
A clockwise motion (control knob turned IN) is one that proceeds 'like the clock's hands': from the top to the right, then down and then to the left, and back to the top. Conversely, a counter-clockwise motion (control knob turned OUT) is one that proceeds from the top to the left, then down and then to the right, and then back to the top.
"Clockwise" and "counter-clockwise" apply to knob or lever control turning direction, which is relative to your facing the control straight on. This is consistently true for all FOX forks and rear shock products.
Bushing Technology & Inspection | Control Direction | Oil Volumes | Structural Inspection | Dropout Thickness Inspection | Torque Values | Unit Conversion | Suspension Tuning Tips | Using the Pump | Important Safety Information | Service Intervals | Contact FOX Service | Warranty Information | FOXHelp Service Web Site
Copyright © 2011
FOX Factory Inc.