Always inspect for scratches or dents on the upper tubes, which will prematurely wear out seals and bushings. Big scratches or dings could compromise the functional integrity of your fork. Contact an Authorized Service Center if scratches or dents are found on your FOX fork.
Check both upper and lower crowns for any damage, deformation or cracks. Contact FOX Racing Shox or an Authorized Service Center if any are present.
Inspect the lower leg for any damage around the brace region, tube sections, disc brake mounts and thru-axle dropouts. Check for cracks or flaking in the paint, which could be an indication of damage to the structure.
With the axle in place, torque the pinch bolts to the proper setting (19 in-lb). There should be a gap present on the under side of the drops. If there is no gap and the walls are touching, this indicates the pinch bolts have been over-tightened. The material in this region may be compromised as a result of the over-tightened pinch bolts. Contact a FOX Service Center if any of these anomalies are present on your FOX fork.
Bushing Technology & Inspection | Control Direction | Oil Volumes | Structural Inspection | Dropout Thickness Inspection | Torque Values | Unit Conversion | Suspension Tuning Tips | Using the Pump | Important Safety Information | Service Intervals | Contact FOX Service | Warranty Information | FOXHelp Service Web Site
Copyright © 2012
FOX Factory Inc.