Browse the rest of the FOX Racing Shox catalog Shows contact information for FOX Racing Shox Prints the contents of this frame only How-to on navigating FOXHelp

Reducer Removal

  1. Screw a 1/4” bolt extractor (see pictures below) counterclockwise with a pulling motion. The reducer will back out of the bushing.
  2. Repeat for the other side.

eng065

 

WHEREVER YOU RIDE. WHEREVER YOU RIDE.

 

Bushing Technology & Inspection | Seals & Foam Rings | Seal Cleaning | Control Direction | Oil Volumes | Structural Inspection | Dropout Thickness Inspection | Torque ValuesUnit Conversion | Suspension Tuning Tips | Using the Pump |  Important Safety Information | Service Intervals | Contact FOX Service | Warranty Information