2025 Transfer 25 Hour Simple Grease Service
Step 1
Clean any debris from the upper post and collar area. Loosen the collar at the junction between the upper and lower post by turning it counter-clockwise (when viewed from above). If it is too difficult to loosen by hand, use a strap wrench to turn it counter-clockwise.
Step 2
Slide the collar up to expose the upper post. Coat the upper post under the collar with a thick film of Slick Honey.
Step 3
Slide the collar back down and thread it back onto the lower post by turning it clockwise (when viewed from above) until hand tight. Reinstall the collar retention o-ring into the underside of the collar by hand or using a screwdriver.
Step 4
Cycle the seatpost 2-3 times through its travel, then wipe off any excess Slick Honey from the exterior of the seatpost.
United States