NEW FOR 2017

  • 32 Step-Cast forks
  • X2 lever options for FLOAT X2 and DHX2 shocks
  • 15QR x 110 Boost axle option - 32/34/36 forks
  • Speed Pedelec models - 34/36 forks
  • GRIP dampers - Performance Series 32/34 forks
  • Performance Series - black ano and updated graphics
New for 2017

NEW FOR 2017

  • 32 Step-Cast forks
  • X2 lever options for FLOAT X2 and DHX2 shocks
  • 15QR x 110 Boost axle option - 32/34/36 forks
  • Speed Pedelec models - 34/36 forks
  • GRIP dampers - Performance Series 32/34 forks
  • Performance Series - black ano and updated graphics
New for 2017
32 Step-Cast Emily Batty

TECHNOLOGY

NEW FOR 2017

32 Step-Cast Chassis

The distinct shape of the lower leg design isn't just for looks. The 32 Step-Cast (SC) chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. The 32 SC features 32 mm upper tubes and ample bushing overlap for a quality ride and the hollowed out lower legs provide even more weight savings.

SEE THE FORK

NEW FOR 2017

X2 Lever

Available on the FLOAT X2 and DHX2 shocks, the new X2 2-position Open/Firm lever retains high and low speed compression adjustment.

NEW FOR 2017

Boost 110

Boost 110 wide axle option now available for 32, 34, and 36 fork families.

NEW FOR 2017

GRIP Damper

Inspired from moto, the new GRIP damper uses our FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Performance Series forks provide Open, Medium, and Firm modes with additional micro-adjust between settings.

NEW FOR 2017

Speed Pedelec

Our 34 and 36 Speed Pedelec forks are made specifically for the rigors of E-BIKES with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-BIKE rider very well.

DPS

DPS

Dual Piston System

FLOAT shocks with our Dual Piston System (DPS) feature three on-the-fly settings—Open, Medium, and Firm—to allow riders to adapt to a wide variety of terrain. The valve design provides full lockout without compromising bump compliance, ride control, and efficiency. Factory Series shocks feature an additional 3 clicks of low-speed compression adjustability in the Open mode.

FIT4

FOX Isolated Technology

Now in its fourth generation, our patented FIT4 (FOX Isolated Technology) closed cartridge system provides three on-the-fly compression damping positions—Open, Medium, and Firm—to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.

The FIT4 cartridge damper was redesigned based on our award-winning HSC/LSC damper, resulting in a much higher performing damper across all forks. This year, the FIT4 damper received an updated tune that provides more sensitivity while maintaining support.

FLOAT AIRSPRING

Patented Air Transfer Port System

The FLOAT air spring system developed for 32, 34 and 40 is lighter and reduces the force to initiate travel, providing excellent sensitivity and small bump compliance for all riders and pressure settings.

Similar to our FLOAT rear shocks, the new FLOAT system features positive and negative air springs that automatically equalize during use to give each rider the right pressure balance. The progressiveness of the spring curve can be adjusted via air volume spacers, allowing riders to fine-tune the feel of the air spring.

EVOL

Our Extra Volume (EVOL) air sleeve significantly reduces the force to initiate travel, providing added sensitivity and better small bump compliance. The progressiveness of the spring curve can be adjusted via air volume spacers, allowing riders to fine-tune the feel of the air spring.

RVS

RVS

Rod Valve System

Rod Valve System (RVS) provides a more seamless damping transition when absorbing small to large impacts, resulting in faster system response, more control, and less harshness.


ACCESSORIES
Kabolt Kabolt install
Kabolt

Lightweight 15QR axle - starting at 34.5g (15x100 mm)

Inspired by Geoff Kabush through our RAD program, the Kabolt is now available for all 15QR forks.

  • 100mm version is 40g lighter than our 15QR (54% weight savings)
  • Available in 15x100mm and 15x110mm widths
  • Compatible with all 15QR forks
  • Installs with a 6mm hex
  • Black and orange axles available
BUY NOW

FOX Digital Pump

DIGITAL PUMP

Our digital pump gives you an exact pressure setting to make suspension and seatpost setup easier and repeatable every time.

  • 0-300 PSI in 0.5 PSI increments
  • Reads in PSI, BAR, KG/CM2
  • Replaceable battery
BUY NOW

Heritage Decals

HERITAGE DECALS

Freshly updated designs and colors for all FOX forks and shocks, now available in 14 colorways. Turquoise, Chrome, Gold-Chrome, Red/White/Blue, Purple, Silver, Orange, Blue, Red, Yellow, Green, Pink, Stealth Black, and White.

SEE ALL THE COLORS

SLS Spring
SLS Spring

Our Super Lightweight Steel (SLS) springs are lighter than titanium at more affordable prices.

A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimized by using a smaller wire diameter and less coils, creating a lighter spring.




DEALER LOCATOR


34 tuning guide

2017 TUNING GUIDES

Learn how to quickly set sag, air spring pressure, compression adjustments, rebound adjust, additional tuning options and more.

FORK SPEC SHEETS »

See axle-to-crown, rake, and more.


FORK GENERAL INFO AND INSTALL GUIDE »

Everything you need to know about general safety and installation of your fork.


SERVICE INTERVALS »

To best maintain the performance and durability of your product under normal use, FOX recommends that you have regular fork and shock maintenance performed according to the service intervals.